Reflective Plastisol Inks

  • Check your off-contact during set-up.
  • Best reflectivity is obtained with a single pass, directly on to the fabric.
  • Do not under base with White or any other ink.
  • Reflective inks tend to deflect heat therefore slowdown your Belt speed.
  • Do not extend or modify ink for it will decrease reflectivity.
  • Always mix ink thoroughly prior to use. Keep lids on containers.
  • Do not mix with any other inks or add reducer.
  • Add ​3060FF Nylon Catalyst @10% by weight when printing on Nylon.
  • Shelf life: 6 months, Store in a cool dry area.
Picture
Silver Reflective
WM Plastisol Reflective Silver
Recommended fabrics: Cotton 100%, Polyester & other Blends
Squeegee: 70-75duro (Soft-Medium) Using strong pressure
Mesh: 86 thru 180ct (34 - 90t/cm) for best results use: 110ct Mesh
Curing Temp: 320F for 90 - 120secs
16360REF Reflective Silver Ink
Important: Testing is recommended to assure adequate brightness and adhesion to your substrate.